bituFLAME is an APP-modified bitumen membrane reinforced with 180 gsm non-woven polyester fabric. bituFLAME has good flexibility at both high and low temperatures.
bituFLAME has many outstanding features, making it the ultimate choice when selecting a torch-on membrane. It's superior qualities of tensile strength, elongation and tear resistance sets bituFLAME apart as the ideal durable solution for your waterproofing requirements. A comparison of product data sheets shows bituFLAMEto have the highest mechanical properties of any modified bitumen available.
epiROOF® is a high quality EPDM rubber membrane used to provide waterproofing protection for a variety of roofing and exterior deck applications.
The epiROOF® system is a fully bonded rubber membrane applied over concrete, steel, fibre cement boards or construction plywood substrates. epiROOF® has been independently appraised as an Accepted Solution under E2/AS1 and as an Alternative Solution under the NZBC.
ecoTUFF TPO membrane is a copolymer of polypropylene and ethylene propylene rubber that has been formed into a membrane sheet and reinforced with a heavy duty polyester scrim.
A ‘second generation’ single ply product,ecoTUFF marries the advantages of previous generation materials while eliminating their limitations. The result is a roofing membrane that is faster and easier to install yet offers outstanding resistance to weathering, temperature extremes, ultraviolet exposure and a whole wide variety of industrial chemicals.
epiSPAN The polymer EPDM, ethylene-propylene rubber, is produced through copolymerization of ethylene, propylene and diene monomer, producing a polymer madeup of saturated linear macromolecules with a paraffinic structure.
In addition to the base polymer, EPDM contains reinforcing carbon black fillers, process chemicals, antioxidants and vulcanizing agents. After mixing the ingredients into ahomogenous plastic compound, two layers of the rubber are rolled out in a calendar toform a double sheet. Vulcanization is then carried out. The long rubber molecules in the material are cross-linked through heat and pressure, creating an elastic membrane.
Chevaline DEXX System
Liquid Applied Flexible Reinforced MembraneA liquid applied, glass-fibre mat reinforced membrane for use in sealing old and new flat and near flat roofs, walk-out decks and patios. Particularly useful where areas are subject to foot traffic and light vehicular traffic. Topcoats are available for various service conditions.
De Boer DUO 4HT C180
APAO/SBS DUO STANDARD CAPSHEET
For waterproofing of different locations including plywood and concrete flat roofs, podium decks, balconies and terraces. The waterproofing membrane is designed to be left exposed. Protection of the membrane is optional.
Colours available in the DUO high Tech range: BO - Brown Oxide, GW - Grey/White, WGG - White/Green/Grey, AGR - Black
De Boer DEBOPLAST 2.5 T/F K180
A flexible waterproofing membrane consisting of a mixture of penetration bitumen, improved with APP (Atatic PolyProplene). The material is reinforced with a non woven polyester of 180 g/m2. Thickness 2.5mm measured on overlap. The upper side is finished with a mixture of talcum and sand, the underside with a sacrificial film. It is used as an underlay for torched or mechanical application.
De Boer DEBOFLEX 2.5 T/F K180
A flexible waterproofing membrane consisting of a mixture of penetration bitumen, improved with SBS (Styrene Butadiene Styrene). The material is reinforced with a non woven polyester of 180 g/m.Thickness 2.5 mm.The upper side is finished with a mixture of talcum and sand, the underside with a sacrificial film.It is used as an underlay for torched or mechanically fixed application.
De Boer DUO 4HT C180 - LANDSCAPE
A flexible waterproofing membrane with a dual reinforcement and a double polymeric bitumen coating. This membrane is designed as a cap sheet for multi-layer or single layer torched application, for root resistant waterproofing systems (green roofs).
Dermabit® ExtraElasto-Plastomeric Membranes
High-performance torch-on waterproofing membrane for multi-layer applications, with or without insulation. Following project evaluation, may be used for single-layer applications.The compound used in Dermabit® membranes contains distilled bitumen and the last generation of technopolymers (APAO) that ensure excellent properties of flexibility, elasticity and adherence as well as making Dermabitextremely resistant to aging.
POLYFLEX LIGHT and POLYFLEX LIGHT MINERAL are elastomeric plastomeric waterproofing membranes with outstanding performance. They are made using a latest generation distilled bitumen-based compound, ultra-light REOXTHENE technology, with a non-woven polyester fabric, reinforced and stabilised by longitudinal glass fibre. The special type of compound, which surpasses previous weight/thickness parameters, and the improved mechanical characteristics of the fabric (excellent elongation, remarkable tensile strength) makes these membranes suitable for the heaviest use. The compound’s special formula provides unique low-temperature flexibility (even at -20°C). The innovative technology used in membrane production, protected by patent, provides another guarantee of the product’s quality, stability, and durability.
Mapeplan TPOMapeplan TPO/FPO membrane is a single ply, synthetic flexible polyolefin sheet membrane in smart white or grey colour with a solar reflective surface that offers significant advantages to building owners and the environment. The builder owner will benefit by:
Reduced power costs from a highly UV resistant membrane that will keep the building interior cooler in summer
Extended membrane lifespan from less thermal movement of the roof structure, with an extremely strong reinforced with polyester mesh membrane.
021 277 4650